Nojima

What You Will Receive

12 pieces of special double-sided adhesive

4 Joker cards

• 2 full-color Jokers with the same back color
• 2 black-and-white Jokers with the same back color

 

Basic Setup – Special Double-Sided Adhesive

This product uses a specialty double-sided adhesive. One side is strong, and the other side is weak. (A normal double-sided tape cannot achieve this effect.)

First-Time Setup (Recommended)

1. Take two Joker cards with the same back color.
2. Peel off one side of the adhesive and place it in the exact center of the back of one Joker.
3. Remove the paper from the other side of the adhesive.
4. Place the second Joker back-to-back with the first one (same back color), aligning them carefully.
5. Press firmly in the center area where the adhesive is.
6. Slowly separate the two cards.

You will find that:

• The adhesive remains attached to one card, centered on the back.
• The exposed adhesive surface is now the weak side and remains slightly tacky.

Note: Because the adhesive is brand new, it may feel slightly too strong at first. Lightly tap the adhesive surface several times with your fingertip to reduce the tackiness. This will make it much easier to use during performance.

 

How It Works

1. Place both cards face up.
2. Put the card with the adhesive on top, and the other Joker underneath.
3. Square the cards.
4. When you press the center, the cards will stick together.
5. When you slide or push at the corner, the cards will separate smoothly.

This strong–weak adhesive balance allows you to control when the cards stay together and when they separate naturally.

Concept Inspiration

 

Rutine Explanation

Two Jokers Production+Sandwich:

The Biddle Trick: 

Royal Flush:

Hotel Mystery:

The Visitor: